Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Is holiday detection testing possible with tanks/pipes not empty?

For conducting Holiday Test on lining of pipes and tanks is it necessary to empty it or it can be done in its service condition?

Imtiaz Hussain
Power & Water utility company - Kingdom of Saudi Arabia
2005

That's an excellent question. The only test I am familiar with, spark testing, requires that the tank or pipe be empty. But in theory there presumably could be a Hall Effect or other test that could detect a small current resulting from a holiday.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2005

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: