Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

ACID COPPER PLATING

WE ARE FINAL YEAR STUDENTS CARRYING OUT PROJECT ON ACID COPPER(SULPHATE) PLATING ON MILD STEEL BOLT.
we are looking for an acid copper brightener ,one or two components that can give us mirror bright deposits in low levelled areas as well.

ESTELLE NMEREOLE
STUDENT - OWERRI, IMO STATE, NIGERIA
2005

copper sulphate ⇦this on eBay or Amazon [affil links] is not an appropriate plating solution for mild steel because the copper is not complexed, and copper is more noble than iron and will therefore immersion deposit.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2005

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: