Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

What other generic names apply to Iridite?

What are the various names that apply to the Iridite process?

Alan D Klein
- Wichita, Kansas, USA
2005

Iridite is a Macdermid trade name for a range of chromate conversion processes, and probably a few non-chromate ones too. Probably the most common application is for MIL-C-5541 chromate conversion coating of aluminum, but also conversion coatings on zinc and cadmium, etc. Please frame your question in terms of your own situations. Thanks.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2005

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: