Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

E-Polish Instructions and Standards

I am looking for any written or electronic lay type instructional information for E-Polish or published E-Polish standards.

We are a mid-size finisher with a new E-Polish line and even newer staff.

John Wheltle
Finishing - Capron, Illinois, USA
2005

Hello, John.

Most of the "must have" books have a chapter on electropolishing (it's also often called "electrolytic polishing"). The most extensive coverage is in the Electroplating Engineering Handbook ⇦ this on eBay, AbeBooks, or Amazon [affil links] . AESF at www.nasf.org may still have remaining copies of their old "Illustrated Lecture" (slide show) on electropolishing. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2005

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: