Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Need general info about Electroplating process for school

Hello, I've been searching for days and honestly, I'm not very good on computers and I have a very important [paper on ELECTROPLATING....... So I really need as much info/sites as possible. Please help me! Anees H.

Anees Harb
- Muscat
2000

Just start with our FAQs, Anees Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2000

DEAR SIR

I need the information about the ELECTROPLATING process for zinc and nickel plating. KINDLY PLEASE SEND ME THE INFORMATION REGARDING THE EQUIPMENT,CHEMICAL COMPOSITION USED IN THE PROCESS.

MANISH VISHWAKARMA
M/S M.S.ENGINEERING - INDIA
2005

Hello Manish. That sounds like a simple request, but it isn't. It took me many more years to become marginally knowledgable about zinc and nickel plating than it took me to acquire my engineering degree, and I don't think it will be different for you. Start with our "must have" booklist. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2005

Please let me know how to electroplating Cs to Cu.

Tri Murni
Indonesian Nuclear Energy Agency - Jakarta, DKI Jakarta, Indonesia
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: