Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Electroless deposition of Ni on PET film

I want to deposit a nickel thin film on the PET (polyethylene terephthalate) through electroless deposition method. May I know what kind of etching chemical method is most suitable for PET or PVC?

Jason. W
Universiti Malaysia Sarawak - Malaysia
2005

2005

Dear Jason,

You have to activate and sensitize the PET or PVC and then go for electroless nickel. The details of activation and sensitization are available in many papers in the open literaure.

T.S.N. Sankara Narayanan
- Chennai, Tamilnadu, India
(ed.note: The good doctor offers a fascinating blog, "Advancement in Science" )

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: