No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Need silver estimation instrument

2005

Hi
I am doing silver extraction business for last two months I wanted to know the correct way to check silver present in waste fixer/hypo. Right now I am using silver estimation paper. But it is very difficult to judge. Is there any instrument to check the silver from waste hypo please let me know.

Thanks

Sanjeev Gadhok
Shri Sai Silver - New Delhi

Hi, Sanjeev.

Is it not possible to titrate for the actual silver content? If you are buying and selling these solutions without knowing their actual silver content, it's tough to do proper business transactions. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
March 17, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: