Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Post Treatment passivation of Zn-Fe-Al alloy

2004

Dear Sirs,

Can anyone help me with information about passivation substances for a surface that consists of two alloys. First alloy 90% Zn and 10 % Fe (more likely less Fe) and second 90% Zn and 10 % Al. The two alloys are both at the outermost surface. The parts have to be passivated, without any specific demand of colour. Any colour with dark appearance would be appreciated.

Elke Langenbach
hegas - Kreuztal, Germany

I think that conventional chromate conversion coating in gold, olive, or black might meet your needs. Depending on the application, though, RoHS compliance issues are possible.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: