No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Want dark finish on brass putter

I have an old brass putter. I want to turn it black or dark blue. Is there a way to do it with common household items? or items I can get at Home Depot? thanks a lot.

Kevin Lam
pga - Anaheim, California, USA
2004

Hi, Kevin. Brown to dark brown is a possibility with liver of sulfur ⇦ this on eBay or Amazon [affil links] . Proprietary brass darkening solution ⇦ this on eBay or Amazon [affil links] could get it closer to black. When you are looking for a chemical powerful enough to permanently discolor metal that way, they can be smelly, dangerous, and nasty. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: