Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Need Lead Release Coating

Currently running an open air process where small amounts of molten lead drop onto cast steel buckets on a conveyor. Looking for a coating to apply to the inside of buckets to ensure the release of the solidified lead-splash when the buckets are tipped upside down.

Any ideas?

Thanks.

Ian Walker
Incineration - Southend, Essex, UK
2004

A flash of chrome will do the job.

Guillermo Marrufo
Monterrey, NL, Mexico
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: