Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Reg. SPI D-3 Finish

May I know where I can find the details of SPI D-3 finish details. Nowhere I could get the details. No books available.

Sathyapal Sathyapalan
Kedage Trutools Pvt.Ltd - Bangalore, Karnataka, India
2004

See letter 20910 on this site. Also as of this date see site: http://www.anthonytool.com/atd/spi2.shtml

Tom Gallant
- Long Beach, California, USA
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: