Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Protective coating on magnesium alloy sheet

I would like to know preserative method for magnesium alloy sheet. Normally I have observed that if you store magnesium sheet on prolong time a white paches appeared on sheet. Any liquid is available in market protect surface? Can any body help me ?

JAYANTILAL PANCHAL
HANSIKA INDUSTRIES - MUMBAI, MAHARASHTRA, INDIA
2004

2004

Hello, Mr. Panchal. Protective coatings for magnesium is a broad field. Please see our FAQ on the subject at www.finishing.com/faqs/magnesium.shtml, then spend some time with our search engine to see dozens of discussions on this subject. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: