Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Need a material to air brush onto lead products for chrome finish

I need a material to air brush onto lead lures which will produce a "chrome-like" finish. Also, the finish needs to be durable like epoxy. Any suggestions will be greatly appreciated.

Bill Johnson
- Arlington, Texas
2004

2004

The chrome-look paints are a relatively recent development and they are not something you buy out of a can at a hardware store and brush on (not yet at least). Rather, you work with one of the developers / patent holders and use their licensed process. Some sources are Alsa Corporation, Gold Touch [a finishing.com supporting advertiser] and G.J. Nikolas [a finishing.com supporting advertiser].

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: