Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Bonding (epoxy) material to hold broken Graphite at 700 degrees C temperature

I'd like to know of any bonding (epoxy) like material that can hold together a broken Graphite material. this will be subjected to a temperature of 700 degrees C.

Leo Oclarit
Philips Semiconductors - Manila, Philippines
2004

I very seriously doubt it. A shot in the dark would be to email a major adhesive company like Master Bond [masterbond.com/challmb.html] to see if they might have a substitute.

PS, you need to somehow quantify bond strength required.

James Watts
- Navarre, Florida
2004

I want to know the Adhesive for bonding Graphite to be used for Bush.

Ali Hyderali Haideri
TECHNOCRAFT - Vapi, Gujarat, India
2005

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: