Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Blue blue, blue brass screws

Need to Color Brass Screws Blue not Blue-White. Customer requires this color. Color must be uniform, not blotchy.

Eric Evans
Precision Stamper - Cedar Grove, New Jersey, USA
2004

You can use next solution:
sodium thiosulphate ⇦ this on eBay or Amazon [affil links] 240 gm copper acetate [affil links] 25 gm
citric acid ⇦ this on eBay or Amazon [affil links] 30 gm
water 1 lit
30 min, 16 °C -- according to Fishlock: Metal colouring.

Goran Budija
- Cerovski vrh Croatia
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: