Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Carbon stop off for carburising

Please give me formulation of carbon stop off compound for selective carburising or anti carb.

Naresh Agarwal
plating shop - Ranchi, India
2004

Copper electroplating is a common and often practical approach.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2004

Ref book you can use enamel coating a sample-SiO2/72%V-al2o3/1.5%v b2o3/1%v-MgO/2%V-CaO/5%V-NaO+K2o/16%v-PbO/2%V-STAND UP TO 650-850 °C. You can use aluminum, copper coating.

Good luck

Khair Shishani
aircraft maintenance - Al Ain, UAE
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: