Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Finishing Shops for the 90's and Beyond

Just looking for a copy of the article you used to have on "Finishing Shops for the 90's and Beyond" Thanks! Mike Solvie

Mike Solvie
- Spokane, Washington
1999

1999

Hi, Mike.

That article was printed in Plating & Surface Finishing, March 1994. Reprints and back issues are presumably available from the publications department at A.E.S.F.; but an on-line version of the article is available right here.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: