Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Grinding a chrome plated roller

We have chrome plated roller in a textile processing machine. We have found number of vertical scratch marks through out the roller. These rollers are hollow and provided with steam to apply a high temperature (about 140-150 C)to the fabric. I need to grind this roller to remove these mark. What is the best method ? What is the suitable grinding wheel for this job?

Regards,

Kosala Gunarathna
Textile manufacturing - Araliay Gardens, Makola South, Makola
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: