No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Debonding problems with metallized PVC film

I have some problems with debonding after metallizing PVC film for, for instance, sweets wrap. I would need some advise to improve the formulation based on tin carboxylate, GMO as internal lubricant and Loxiol G72 as external lubricant. Thank you sincerely for your help

Rafael Erro
- Barcelona, Spain
1999

Have you find any solution to your problem, we have been facing with the same difficulty.

Hoping to hear from you,

Neslig¸l Pervane
- Istanbul-Turkey
2000

Flame or spark treatment seems to be the only way to improve adhesion.

Rafael Erro
- Barcelona,Spain
2001

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: