Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

ELD of Cobalt onto nickel plated dots (400nm dia.)

I have a Si substrate coated with a Cr layer. There are Ni dots (200nm diameter) deposited on the Cr layer. Now I want to enlarge the dots to 400nm in diameter with Co by ELD. Can I have a protocol for the process?

Thanks!

Doug Cai
student - Newton, Massachusetts
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: