Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Immersion silver formula

Can anyone provide formulas for immersion plating of silver over copper and/or brass, Cyanide or non cyanide based.

Dick Iantosca
specialty manufacturer - Delray Beach, FL, USA
2004

Any soluble silver salt, including silver nitrate, will immersion plate on copper or brass. Practical formulations are proprietary but readily available.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2004

See letter 27967-hope it helps!

Good luck!

Goran Budija
- Cerovski vrh Croatia
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: