Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Condensate corrosion rates

I want to use a corrosion coupon(s) to measure the corrosion rate in my steam condensate system but I have no reference information concerning typical or average corrosion rates.Can anyone supply the info or refer me to source book?

James C. Emerson
Specialty Chemicals - Cincinnati, Ohio
2004

The appendix of ASTM B117 contains useful information on corrosion rates. Also, you may want to join a Proficiency Testing group, such as through National Exposure Testing, which will let you see the anonymous results of many tests.

Harold D. Hilton
Weathering and Corrosion Testing Instruments - Chicago, Illinois, USA
2004

astmb633.htmlg1-03.html" --> offers information regarding corrosion rates of various metals when used as a weight loss coupon.

Cynthia L. Meade
- Sylvania, Ohio, USA
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: