Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Minimizing UV reflections from metallic parts

Hi all,

My company produces wide format digital printers. This printers use UV systems to cure the ink. We need to minimize UV stray light reflections from variouss metallic parts (Aluminum, stainless) to the printheads. Can someone advice me on coatings that can help me minimize these UV reflections ?

Arie Leizer
digital printing - Lod, Israel
2004

Acrylic based E-Coat for metallic Parts will work.

Khozem Vahaanwala
Saify Ind

Bengaluru, Karnataka, India

2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: