Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Calibrating pH meter

I am calibrating a pH meter. Can I use distilled water that I already prepared at normal room temperature? and its pH is 7 or is variable?

o.u.hyd
researcher - Hyderabad, A.P., India
2004

No, you need at least two buffered standard solutions to calibrate a pH meter.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2004

2007

How do I calibrate my ph pen? I have 2 solutions with the pen, but instructions are mad. My solutions are, ph4.003, and ph 6.864, they are my buffers. This is for checking ph in a tropical fish tank.

Thanks in advance

Jim

James Langan
- Glasgow, Scotland, UK

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: