Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Removing powder coat from aluminum

I wanted to know what is the best way to remove powder coat? My purpose is to remove it from an aluminum part and then polish the aluminum to a satin finish. Any ideas let me know.

Michael C Colby
Spindle Engineering & Design - Springfield, Vermont, USA
2004

Please try caustic soda ⇦liquid caustic soda in bulk on Amazon [affil link] 200 g/l plus TEA and gluconate for large scale design to inhibit aluminum ad some silicate. For satin finish you need never dump etching bath separately.

Hadi Khosravi
- Tehran, Iran
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: