Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Getting rid of brass finish on lamps to another finish

2004

I had my brass lamps re-finished and polished. The problem I now have is they're turning black and spotting. Rather then going to the expense of doing it again I was wondering if you have any suggestions on using a product that would eliminate this procedure. Some sort of paint, or "coverup".

I would appreciate any suggestions.

I am just trying to figure out what to do with expensive lamps that are pitting.

kate kellner
hobbyist - charleston, South Carolina

Brass needs brass lacquer ⇦this on eBay or Amazon [affil links] to prevent tarnishing. It sounds like your lamps weren't lacquered.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: