Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Chemical conversion coating on aluminum alloy

One of my clients has had a failure with chemical conversion coating on aluminum and the vendor cannot seem to correct the problem. I would like to find aerospace-quality chemical conversion coating applicators for small aluminum alloy components in the San Francisco bay area.

Stan Peters
Independent Consultant - Mountain View, California, USA
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: