Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Galvanneal steel vs. aluminum buses

I am considering a purchase of a bus made with galvanneal steel body. In the past I have purchased aluminum body buses and have experienced major problems with electrolysis and pitting. Can you comment on the galvaneal steel to versus aluminum.

Randal Clark
consumer/bus company owner - Duson, Louisiana, USA
2004

Virtually all modern cars are painted galvannealed steel.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: