Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Ideal temperature for DI hot water seal?

What is the ideal operating temperature for a D.I. water seal tank?

Thanks!

Paul Gaddini
Production Manager - Redwood City, California, USA
2004

Aluminum How-To
"Chromating - Anodizing - Hardcoating"
by Robert Probert

Also available in Spanish

You'll love this book. Finishing.com has sold almost a thousand copies without a single return request :-)

"The Surface
Treatment &
Finishing of
Aluminium and
Its Alloys"
by Wernick, Pinner
& Sheasby
pinner

(note: this book is two volumes)

on eBay or

AbeBooks

or Amazon

(affil links)

2003

It's not entirely clear that you are talking about a seal tank for anodizing, Paul, but I think you are. I don't believe there is an ideal temperature because the energy demand skyrockets asymptotically as you approach the boiling point. But I think as close to boiling as practical, say 202 - 205 deg. F., is a good temperature.

Unless there's a reason why not, you might consider a nickel acetate seal as a more energy-efficient alternative. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: