No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Need to restore shine to weathered brass door hardware

I refinish Exterior doors for a living and usually restore the brassware (Kickplates and Door hardware). I need a better and faster method that what I am using. The majority of the time the polished brass has oxidized and the sealer (lacquer) has been weathered off of the surface. Liquid products like Brasso take too long. Is there a cleaner, a buffer, a polish available that expedites the work?

Steve Kiley
Furniture Refinisher - Dallas, Texas, U.S.A.
2003

A buffing wheel would certainly speed up the process. Although I haven't tried using Brasso ⇦ this on eBay or Amazon [affil links] with a buffing wheel, I don't see why it wouldn't work (might make a splashing mess though since Brasso is pretty soupy).

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: