Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Vibratory Plating

Does anyone have any experience using a vibratory plating machine to nickel coat material having a size of 100/120 mesh and smaller? Thank you.

warren silverman
1999

I can't tell you too much about this, Warren, because the company I'll mention is as much about intellectual property as about offering product for sale, but I would suggest that you contact:

Dr. David Lashmore
Research Director
Materials Innovation
8 Commerce Avenue
West Lebanon, New Hampshire 03784

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: