No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Powder coating must be to FDA certification

We wish to manufacture die cast product which will be used for food processing.

Specific requirement states the parts to be dust covered in RAL 9006 (aluminum white) and covered with transparent lacquer, appropriate for food processing. The painting must satisfy FDA certification.

However, our local coating and materials suppliers have no experience for FDA certification and / or idea of the compliance.

Please advise where we can find details of FDA standard or certification and / or specific compliance details.

You may also recommend suitable coating products for our application.

Mark Revett
Engineering - Taichung, TAICHUNG, Taiwan
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: