No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Powdercoating performance benchmarks

I am currently undertaking a business course project on an aluminum extrusion and powder coating company. While I have a feel for their performance in powdercoating I have no idea what constitutes Good or Best Practice What would you consider a good level of performance for an extrusion power coating operation in terms of reject rate?

Note this operation conducts in the region of 20 colour changes per day and powder coats around 1 million pieces per annum.

Ian Cooper
- Auckland, New Zealand
2003

"The Six Sigma Handbook"

on AbeBooks

or Amazon

(affil links)

Hi, Ian.

Letters 14440 and 834 give a couple of opinions, Ian. But you may be aware that some "Six Sigma" folks feel that a reject rate beyond six sigma (3.4 rejects per million) can and should be improved upon :-)

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: