Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Plasma Electrolytic Oxidation vs. other aluminum treatments

I want to know exactly what "Plasma Electrolytic Oxidation" is all about. I would also like to know its Hardness in units of Ha, Surface finish in RA value, and its cost per m2 in Indian Rupee. I would also like to know what technical assistance can we get to put a unit at our place, and its cost approximately. Please do provide me a comparative study of a product out of PEO with a product of hard anodizing, All for aluminum surface

Tomsy M [last name deleted for privacy by Editor]
Textile - Surat, Gujarat, India
2003

October 16, 2008

Hi, Tomsy. I believe this is also called spark discharge anodizing. I do believe that it has some real advantages over conventional anodizing, but I haven't seen any writeups in technical journals which compare the technologies, so I think you'd have to go to the suppliers for such case studies. There are two or three suppliers who specialize in this process. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

finishing.com is made possible by ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: