No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Market for used electropolishing acid?

Is there a market for spent electropolishing acid. It is a combination of phosphoric acid and sulfuric acid. It is used to polish stainless steel.

Jimmy G. Wade
equipment company - Theodire, Alabama
1998

There could be. Furane catalyst (420 grams/litre H2SO4 & 480 grams/litre H3PO4) is used set furane resin which binds the sand in metallurgical casting moulds. However I don't know what is the effect of the dissolved metals.

Colin Maxwell
- Sydney NSW Australia
1999

Does any one know where I can obtain design drawings and data for a electropolishing system?

Paul E Chorley
- Perth. Western Australia
2000

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: