Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Antique brass finish

I would like to obtain an antique brass finish on a metal headboard to match the drawer hardware on my dresser. I am planning on using a primer first, but what is the best method for obtaining the antique finish after I do that?

Linda morrissey
- las vegas, Nevada, USA
2003

A real antique finish on metal would be applied on bare metal, not primed metal. What you are talking about is a paint that simulates old brass. Rustoleum and Krylon and others offer this in spray cans at your hardware store.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: