Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Novice trying to polish bike frame

Could someone please advise me on what tools and polishes are best to strip the paint and polish an aluminum motorcycle frame for someone who has never done it or seen it done before.

John Jackson
- Fayetteville, North Carolina
2003

Go to uponone.com. It's a sight sponsored by starboyz. Go to the how to section and there is a how to polish your frame area. I just got done doing it and it turned out awesome. It took me about 24 hours all together to do the frame, swingarm, and underneath my seat. Good luck.

Jim
- Moon, Pennsylvania
2004

August 29, 2008

Hi, John. letters 800, 1831, and 10917 go into substantial detail about aluminum polishing. Good luck!

Thanks, Jim. Full name next time, please.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: