No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

School project on auto polishing compound

Q. I want to experiment making a basic auto polishing compound. What mild abrasive powder or powders should I use and what should I try as the compound base? I do not want to use any petroleum distillates since this is a school project.

Dan C.
- Sewickley, Pennsylvania, USA
2003

A. I guess I'd try groundfine pumice ⇦ this on eBay or Amazon [affil links] or Bon Ami ⇦ this on eBay or Amazon [affil links] in beeswax ⇦ this on eBay or Amazon [affil links] if I wanted a completely natural polish. But I'd want to try it out on your car's paint before I try it on my own :-)

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

Q. I need more info about auto polishing compound to make it.

Malik salim shafi
shafi sons - Karachi, Sindh, Pakistan
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: