No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Getting paint off old brass

I am remodeling my 100 yr old victorian home and many of the brass hinges, fixtures have been painted many times. I am particularly looking to refurbish some door/buzzer what can I use to take paint off.

Kathy Babel
- Luray, Virginia
2003

Any paint solvent ought to do this: turpentine ⇦ this on eBay or Amazon [affil links] , mineral spirits ⇦ this on eBay or Amazon [affil links] , paint thinner. etc. Hopefully you will not need a methylene chloride stripper because the fumes are very dangerous to your health.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
April , 2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: