No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Exactly how to electroless nickel on silicon: substrates, process, chemicals, timings

Q. How to deposit nickel electrolessly on a silicon substrate. I need to know the whole process along with the chemicals and the timings.

Thanks,

Abhishek
- Delhi, India
2003

Ed. note: This forum was built as a gathering place for sharing tips, pics, anecdotes, & opinions to promote camaraderie.
When engagement is requested by strangers withholding their names, readers may be less likely to engage.

A. Hello Mr. Abhishek. Unfortunately, what you are asking for fills whole books! Here are two such books as a start: Chemical (Electroless) Nickel Plating, by G.G. Gawrilov and "Electroless Plating - Fundamentals & Applications" by Mallory & Hajdu [on eBay , Amazon, or AbeBooks affil links] .

You probably need to learn a bit about electroplating and then ask some specific questions. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

finishing.com is made possible by ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: