Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Questions about gold thin film deposition

I'm student and I am studying the best way (e-beam evaporation, sputter deposition, electroless deposition...) to depose gold thin film (2µm) on polymer substrates like polypropylene, PTFE. What do you think I should do?

Detalle Mikaël
- France
2003

Detalle, your question can not be answered simply. All three technologies cover volumes of info which you could not absorb in one sitting. Since electroplating and electroless plating are common, I would focus on one of those. You may start with Metal Finishing Guide Book. Someone at this web site could give you a free copy of an old issue. Unfortunately I threw away my old copies.

Mandar Sunthankar
- Fort Collins, Colorado
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: