Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Cadmium Waste

Can anyone furnish recent figures for: a) tons of cadmium waste produced from plating and b) the costs of cadmium waste disposal (in U.S.)? This info is needed for a current report.

Marc Pepi
NAWCWD - China Lake, California, USA
2003

Data of that type is in my rather dated copy of "Using Cadmium Safely", published by the Cadmium Council. Try "the-cadmium-council" on a search engine and I'm pretty sure they'll have what you need.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2003

Thanks Ted!

Marc Pepi
NAWCWD - China Lake, California, USA
2003

You're very welcome, I hope the lead works out. I see you've moved a couple of thousand miles west. I was out to your plating facilities there 8 or 9 years ago.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: