No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Colouring copper by flame

I'm doing my first steps in copper artwork and I'm doing well ,but have a problem coloring copper by heat, I have tried many various ways but nothing. I can't get some vivid colors, I also tried to put some oils and grease but they are melting and burning .Please tell me how to apply oils and grease to copper and in what amounts. Is it possible with propane torch ⇦ this on eBay or Amazon [affil links] or butane torch ⇦ this on eBay or Amazon [affil links] ?

Djoko Ivanoski
- Skopje, Macedonia
2003

"amazon Video: Basic Copper Smithing and Flame Painting on Copper"
from Amazon

(affil links)

Hi, Djoko. letter 2662 will be a good start. Best of luck with it.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: