Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

ANALYSIS OF SILVER

We wish to establish a silver analysis laboratory in Salem. We are having spectrophotometer in our Testing Lab. Currently we are finding the results through volumetric method. The procedure is one gram of silver is dissolved in HNO3 and diluted to 100 ml. Then 5 ml of solution is titrated with Ammonium thiocynate. Our question is, We want to analyze the purity of the sample silver using spectrophotometer. Is there any method to find the purity of the sample silver using spectrophotometer. If possible please answer us.

Raja.M
Sct Salem - INDIA
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: