Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

How do you coat nickel seal cylinders

I am interested in the ability to nickel seal motor cylinders. I am not sure what it consists of or what it takes to do the job. I am in the powder coating business and I would like to try this if anyone can help me it would be greatly appreciated. I need to know where to get the product and how to do it. Thank you for your time.

Jamie Silvers
- Duncan, SC
2002

I think you mean 'nikasil' (nickel-silicon carbide). Spell it that way in the search engine near the top of this page, and you'll at least be on your way.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: