Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Electropolishing and deburring

We want detailed information and formulas about electropolishing stainless steel 300 and 400 series although we are doing this job for two years

Eryýlmaz mehmet
- Istanbul, Turkey
2002

2002

It is a bit unrealistic to expect readers to successfully guess what you have already learned and have not yet learned from performing a process yourself for a period of two years. What detailed solutions and detailed operating conditions are you using, and in what ways are you less than happy with them? Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: