Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Stripped rims are oxidizing

2002

I have a CBB929RR and I had stripped the paint of my rims and now they are oxidized BAD, what can I do? I have re sanded them and re sanded... I have re polished over and over. What are my options?

Thanks,

Rich Melillo
- Gretna, Louisiana

Lacquer! Polish them, then immmediately degrease and lacquer them, doesn't look much different from bare polished aluminium, except it doesn't corrode, I've used acrylic car lacquer with great success on copper and aluminium

George Ingram
- Swansea, Carms, Wales
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: