No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Technology for Superabrasive Electroplated Products

1998

To: Potential technology providers

We are a manufacturer of conventional grinding wheel in Taiwan and are looking for the technology of superabrasive (CBN & Diamond) electroplated products. Please advise whether you have expertise in this field. Have you heard about the technology--hard welding, in which the acid solution is not used in the manufacturing procedures.

Joseph Wu

One process that would work is flame, plasma, or arc spraying technologies. You can deposit thick, rough, and extremely had coatings, using a variety of materials such as titanium, chrome, ceramics, tungsten, etc.

Thank you, and good luck,

David M. Weaver [deceased]
- Toccoa, Georgia

Ed. note: With great sadness we must advise that David passed awayt on Aug. 15, 2003.
1998

I have not heard the term 'hard welding'. But for the electroless and electroplated diamond & nickel coatings, Surface Technology offers proprietary technology.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
1998

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: