Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

What is "Alodine finish"

Is there anyone out who could explain to me in a short sentence what "Alodine finish" means?

Thanks in advance,

Thorsten Cornils
- Germany
2002

In short, Chromate Conversion Coat-check milspec "MIL-C-5541".

Bill Grayson
- Santa Cruz, California, USA
2002

More correctly, ALODINE is a trade name for various conversion coating products manufactured by Henkel. While most of their products are chromate conversion coating chemicals for aluminum such as Alodine 600 and Alodine 1200, they do produce non-chromate conversion products such as Alodine 5200. Your best bet is to contact Henkel.

Milt Stevenson, Jr.
Syracuse, New York
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: