Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Intentional tarnishing of brass

I would like to tarnish some brass putters (golf) to a point of making them as black as possible. What chemicals should I use and the technique to be followed.

Richard J. Grossman
1998

Richard,

You need to contact a company called Birchwood Casey [ed. note: now Birchwood Technologies [a finishing.com supporting advertiser]]. They make many solutions to oxidize your putters. They also sell turnkey setups to have a zero discharge system.

Eric Morris
- Philadelphia, Pennsylvania
1998

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: